Timesheet status: Error

August 5, 2016, 11:56 pm

≫ Next: Documet icon is not appeared for few projects in project center

≪ Previous: Create Status of projects using Reporting Services

Hi,

During submission of timesheets, some of the users getting timesheet status as "error".

Do anybody know the reason why we get "error" status?

Thanks in advance,

Subhan.

↧

Documet icon is not appeared for few projects in project center

August 6, 2016, 3:23 am

≫ Next: Can Assignment fields be Synchronizing with a Sharepoint Task List

≪ Previous: Timesheet status: Error

Hi,

I have uploaded the documents in project site, but the document icon is not displayed against project in project center, i have this problem with around 4 projects whereas it is fine with all other projects.

Do anybody experience the same issue before?

Thanks in advance,

Subhan.

↧

Can Assignment fields be Synchronizing with a Sharepoint Task List

August 6, 2016, 7:51 am

≫ Next: After Upgrade Project Server, can't generate Project Site

≪ Previous: Documet icon is not appeared for few projects in project center

I understand that only the fields that are mapped between the MS Project and Sharepoint task list will synchronize and that following fields will sync by default:

Task Name
Start date
Finish (due) date
% Complete
Resource Name
Predecessor

However, can other Task List fields be set up to "synchronize" at the assignment level in MS Project? i.e., an assignments Default Start, Actual and Remaining Work or Duration? I am wondering if assigned resources can update their status using "Actual Work" and "Remaining Work" in a SharePoint Task List as they would in the My Task PWA page versus using the "% complete" in Task List. Any thoughts/ comments are welcomed.

\Spiro Theopoulos, Montreal, QC (Canada)

↧

After Upgrade Project Server, can't generate Project Site

May 16, 2014, 5:55 am

≫ Next: Project Server 2013 PSI Error: Action canceled because there was a Server Event Service problem

≪ Previous: Can Assignment fields be Synchronizing with a Sharepoint Task List

Hello, after upgrade to PS 2013, we getting this error when we use a template for some EPT.

CreateWssSiteContent: Creating project site failed! Project Uid=b0e4bc09-f8dc-e311-941c-00155d16d31b, site URL=http://pmo/PWA/LIO, site name=LIO. System.Runtime.InteropServices.COMException (0x8107058A): <nativehr>0x8107058a</nativehr><nativestack></nativestack>The content type name _$Resources:ReportServerResources,DataSourceContentTypeName;_ cannot contain: \ / : * ? " # % < > { } | ~ & , two consecutive periods (..), or special characters such as a tab. at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId)Microsoft.SharePoint.SPException: The content type name _$Resources:ReportServerResources,DataSourceContentTypeName;_ cannot contain: \ / : * ? " # % < > { } | ~ & , two consecutive periods (..), or special characters such as a tab. ---> System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>The content type name _$Resources:ReportServerResources,DataSourceContentTypeName;_ cannot contain: \ / : * ? " # % < > { } | ~ & , two consecutive periods (..), or special characters such as a tab. at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPSite.CreateWeb(String strUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid webId, Guid rootFolderId, Boolean createSystemCatalogs, Guid appInstanceId, String appWebDomainId) at Microsoft.SharePoint.SPSite.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.Office.Project.Server.BusinessLayer.AdminProjectSiteAllocator.CreateSPWeb(ProjectSiteConfigurationInfo configInfo, SPSite topSite):
- WSSCreateSiteFailure (16400). Details: id='16400' name='WSSCreateSiteFailure' uid='1632d91d-f8dc-e311-941c-00155d16d31b' projectUID='b0e4bc09-f8dc-e311-941c-00155d16d31b' workspaceUrl='http://pmo/PWA/LIO' projectWorkspaceName='LIO'.
Queue:
- GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='1732d91d-f8dc-e311-941c-00155d16d31b' JobUID='af9afa0f-f8dc-e311-941c-00155d16d31b' ComputerName='47456c1c-0ef0-4340-a7c1-2ec0ad2b5dcb' GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='e573919c-a3c8-f087-b5dc-bb7a29af3533'. For more details, check the ULS logs on machine47456c1c-0ef0-4340-a7c1-2ec0ad2b5dcb for entries with JobUID af9afa0f-f8dc-e311-941c-00155d16d31b.

Any Idea?

Thanks!

Raymundo Chapa, MCTS http://www.inavant.mx/blog http://projectaserverzone.blogspot.com/

↧

Project Server 2013 PSI Error: Action canceled because there was a Server Event Service problem

August 8, 2016, 10:42 am

≫ Next: Missing Capacity

≪ Previous: After Upgrade Project Server, can't generate Project Site

Listed below is the ERROR: I can't find any info relating to this issue

We have Project Server 2013, SQL 2012 and Windows Server 2012. CU on sharepoint 2013 / Project Server 2013 is from March 2016

The errors returned from the queue are as follows:

Error ID: 22002

Error ID: 26000

Detailed error below - send it to the administrator for more detailed troubleshooting.

<?xml version="1.0" encoding="utf-16"?>

<errinfo>

<general>

    <class name="Action canceled because there was a Server Event Service problem.">

      <error id="22002" name="GeneralActionCanceledBecauseServerEventServiceProblem" uid="2932bbdf-8c5d-e611-af1a-0050569e4702" EventName="ProjectUpdating" />

    </class>

    <class name="Queue">

      <error id="26000" name="GeneralQueueJobFailed" uid="2a32bbdf-8c5d-e611-af1a-0050569e4702" JobUID="dc21e8de-8c5d-e611-bb8b-0050569e082c" ComputerName="a3046be5-704c-4667-838f-44325208e12d" GroupType="ProjectUpdate" MessageType="ProjectUpdateMessage" MessageId="2" Stage="" CorrelationUID="b7d5979d-3d02-90a0-3cb6-e36523c76f8e" />

    </class>

</general>

</errinfo>

↧

Missing Capacity

August 9, 2016, 1:57 am

≫ Next: Mismatch in %Complete in PWA and MSP at project level.

≪ Previous: Project Server 2013 PSI Error: Action canceled because there was a Server Event Service problem

Hi, Capacity for previous months is showing in all standard PWA views however not in the data coming via the Portfolio Analyser Cube - it only shows the previous 10 weeks or so capacity data. This happens for All resources.

Any thoughts?

Thanks Steve

↧

Mismatch in %Complete in PWA and MSP at project level.

August 9, 2016, 3:08 am

≫ Next: Default standard rate settings in Project Server 2013

≪ Previous: Missing Capacity

Some strange behavior occurred when the project is opened in MS Project 2010, it shows to be 100% complete but when you see the same project in the project center it shows 99 % complete. A fresh publish will then change the information in Project Center BACK to being 100% complete BUT, a week or two later, it will be back to 99% complete again.

Please help.

Thanks in advance..!

Regards

Brijesh

↧

Default standard rate settings in Project Server 2013

October 6, 2013, 10:34 pm

≫ Next: having win10 problem with 100% hdd use for minutes

≪ Previous: Mismatch in %Complete in PWA and MSP at project level.

Hi,

How to set the default standard rate in Project Server 2013?

By default when i create a resource it shows in "hr", i want to change this to "day" by default.

I did the following:

Open MS Project

File-Info-Open Enterprise Global

File-Options-Advanced- General options for this project: Checked out Enterprise Global: "Automatically add new resources and tasks" Default standard rate:

Save Enterprise Global

Exit and reopen MS Project

Now: When i create a resource in PWA-Resource- and open the resource in MS Project, still i see "hr" not "day".

Please help.

Second Question: "Enterprise Global" removed from PWA?

K.Gokulraj

↧

having win10 problem with 100% hdd use for minutes

August 9, 2016, 7:53 am

≫ Next: what is field ref content type in sharepoint 2010 and what is its use

≪ Previous: Default standard rate settings in Project Server 2013

I have seen recent questions from win 10 users about seeing intermittent 100% usage of hdd, tying up system for minutes. Is anyone else seeing this?

↧

what is field ref content type in sharepoint 2010 and what is its use

August 9, 2016, 8:41 am

≫ Next: What is the difference between a user and resource?

≪ Previous: having win10 problem with 100% hdd use for minutes

what is field ref content type in sharepoint 2010 and what is its use

Abhishek Tiwari

↧

What is the difference between a user and resource?

July 6, 2015, 8:09 am

≫ Next: Project Professional needs to be installed to open the schedule. Install Project and try again. Error.

≪ Previous: what is field ref content type in sharepoint 2010 and what is its use

What is the difference between a user and resource?

↧

Project Professional needs to be installed to open the schedule. Install Project and try again. Error.

August 9, 2016, 12:29 pm

≫ Next: Timesheet history page error

≪ Previous: What is the difference between a user and resource?

We have Project Server 2013 with approximately 300 users. We are randomly receiving the error below. We can click "ok" and the schedule does open in MSP. We have applied the April cumulative update which lists a fix for this error. Does anyone have any suggestions?

Thank you for your time,

Sandy

↧

Timesheet history page error

August 9, 2016, 11:36 pm

≫ Next: Unable to approve timesheet

≪ Previous: Project Professional needs to be installed to open the schedule. Install Project and try again. Error.

hello every one

in project server 2013 - approval center , when I click history ribbon , timesheet button I get below error

does anyone help me

Server Error in '/' Application.

Your request has failed for an undetectable reason; you may need to
contact your system or database adminstrator.

Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.

Exception Details:
Microsoft.SharePoint.SPException: Your request has failed for an
undetectable reason; you may need to contact your system or database
adminstrator.

Source Error:

An unhandled exception was generated during the execution of the 

current web request. Information regarding the origin and location of the 

exception can be identified using the exception stack trace below.

Stack Trace:

[SPException: Your request has failed for an undetectable reason; you may need to contact your system or database adminstrator.]
   Microsoft.Office.Project.PWA.ApplicationPages.ReviewTSPage.<LoadReviewData>b__6(PSI psi, PSClientError err) +133
   Microsoft.Office.Project.PWA.PJContext.HandleTryPSIErrors(UInt32 ulsID, SoapException se, String scopeName, Action`2 onError, Func`1 rethrow) +361
   Microsoft.Office.Project.PWA.PJContext.TryPSITag(UInt32 ulsID, String scopeName, Action`1 tryBlock, Action`2 catchBlock, Func`1 rethrow) +221
   Microsoft.Office.Project.PWA.PJContext.TryPSITag(UInt32 ulsID, StackFrame frame, Action`1 tryBlock, Action`2 catchBlock, Func`1 rethrow) +149
   Microsoft.Office.Project.PWA.ApplicationPages.ReviewTSPage.LoadReviewData(Boolean fromCache) +427
   Microsoft.Office.Project.PWA.ApplicationPages.ReviewTSPage.PJWebPage_OnLoad(EventArgs e) +954
   Microsoft.Office.Project.PWA.PJWebPage.OnLoad(EventArgs e) +146
   System.Web.UI.Control.LoadRecursive() +95
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2936

↧

Unable to approve timesheet

August 9, 2016, 2:19 am

≫ Next: Closing timesheet period

≪ Previous: Timesheet history page error

Hi,

I have a project plan in which there are tasks created under two summary tasks - group 1 and group 2 with two status managers - A for all tasks under group 1 and B for group 2. Everything works fine for group 2. For group 1 tasks, A is not able to approve the timesheets - he gets a message asking for next approver where as this is not happening with B for group 2 tasks. Both A & B are part of Project managers group and resource managers groups and they have same permissions. A is already set as status manager for all tasks in group 1.

Thanks in advance.

Bala Bhavana

↧

Closing timesheet period

August 9, 2016, 11:31 pm

≫ Next: Outlook 2016 not allowing me to add a new account - Office 365

≪ Previous: Unable to approve timesheet

Hello everyone

in project server 2013 , I cant close timesheet period. when click close button , nothing change and nothing save

does anyone help me

↧

Outlook 2016 not allowing me to add a new account - Office 365

August 10, 2016, 12:40 pm

≫ Next: Importing Custom Outline Codes to a PWA Lookup Table

≪ Previous: Closing timesheet period

Hi All,

I deleted the previous user (to pass on the surface to a new employee) and Outlook 2016 (from Office 365) is not allowing me to add a new account. It just sits there thinking and thinking until finally it times out. I've tried manually as well, but still no luck.

Any suggestions?

TIA

↧

Importing Custom Outline Codes to a PWA Lookup Table

August 10, 2016, 2:43 pm

≫ Next: Project Server 2013 Training/Online Training

≪ Previous: Outlook 2016 not allowing me to add a new account - Office 365

We have a local Outline Code 1 field in an mpp file. The file can be saved to the "Server" (A cloud instance of PWA hosted at <name>.SharePoint.com/sites/pwa) or locally.

We wish to migrate that data from the file up to an Enterprise level lookup table, and, assign a Enterprise Level variable.

A review of prior posts from 2010-2013 indicates this is not possible.

Has this been solved, and what procedure should we follow. We are familiar with Copy/Paste in IE ... tacky and time consuming. We'd like to be able to do this with several fields from other programs, etc.

We can to it between local files easily ... how to we get it up to PWA?

If you feel this post answered the question, please vote for it. I am also available here:
msprojectblog.com

↧

Project Server 2013 Training/Online Training

August 11, 2016, 3:05 am

≫ Next: How to load “Project Server” project with Microsoft.Office.Interop.MSProject in C#

≪ Previous: Importing Custom Outline Codes to a PWA Lookup Table

Dear Project Server users,

My company is interested in some professional training and education regarding Project Server 2013, and it's functionalities.

Has anybody had any experience and can recommend some companies, consultants or online training courses?
It would be best if these are located in Europe because of costs.

Thank you for your time.

Sincerely,
Petar Bogojevic

↧

How to load “Project Server” project with Microsoft.Office.Interop.MSProject in C#

August 11, 2016, 10:07 am

≫ Next: There is a problem

≪ Previous: Project Server 2013 Training/Online Training

How can I programmatically tell MS Project to load a Project Server project using Microsoft.Office.Interop.MSProject in .NET C#?

Can I use Microsoft.Office.Interop.MSProject.Application.FileOpenEx?

I've seen documentation that says the "Name" parameter can use a syntax like this "<>\MyProjectName". And like this: "<ODBCDataSourceName>\MyProjectName".

Are ODBC data sources really used to access Project Server and PWA?

Can you provide any more information? Such as...

- How do I create an ODBC data source to point to PWA?
- Are there any newer connectivity technologies than ODBC, when using Office.Interop?
- Do you have any examples?

ScoutwestInc

↧

There is a problem

August 11, 2016, 2:01 pm

≫ Next: Timesheet Actual Hours Prepopulation of hours

≪ Previous: How to load “Project Server” project with Microsoft.Office.Interop.MSProject in C#

Hello i am proud for working with Microsoft visual studio 2015 but ther is a problem faced me and it is the program restarted when i want to excute a project in the program whatever small and a hint apper saying that the program is stopping its work please help me to solve this problem

↧